Thursday, May 1, 2025
HomeAutodeskCOMPLETE AUTODESK SOFTWARE INSTALLATION GUIDE

COMPLETE AUTODESK SOFTWARE INSTALLATION GUIDE

COMPLETE AUTODESK SOFTWARE INSTALLATION GUIDE

 

 

As you know, you can activate Autodesk products in two ways: single-user and license server. IN ORDER TO USE THE SINGLE-USER MODE, WHICH IS PRACTICAL AND SUITABLE FOR MANY USERS, YOU CAN USE THE XFORCE KEYGEN. For server license mode, the FLEXNet method is also recommended.

 

AutoCAD 2025 Installation Instruction NLM Automatic Activator Method:

1) First, make sure that your antivirus as well as Windows Defender are completely disabled to prevent the activator from being suddenly removed.

2) Extract the downloaded data by WinRar and install the software.

3) Once the installation is complete, stop running the software. Go to the ACTIVATORS folder and enter the Method.1 folder. Run the .exe file as Run as Administrator. For a few minutes, the CMD windows will open and close for you many times. Don’t worry and let the activator operation take place. Finally, the Cracking Complete message should be displayed. Enjoy for you.

4) Now run the software. When a window is displayed to activate the software, select the “Use A Network License” option. If there is another option, such as the license type, which is single-machine or multi-car, please select the “Single License Server” option. A box will be displayed for you to enter the server in which you must enter the phrase “127.0.0.1”. Of course, you can also enter the phrase “localhost”, which is not recommended.

5) Note: If you see the message “Network License Not Available”, please move the version.dll file in the Method.1 folder to the path written in the HOWTO.txt written tutorial.

6) It is always recommended to exclude the software installation folder in your antivirus and Windows Defender. Also, block the executable files of the software in the firewall to prevent your license from being deactivated.

———————–

Download & View Autodesk Video Installation Tutorial 2022-2023 – NLM Method

———————–

AutoCAD Installation Instruction 2022-2023 Crack File Method:

Once the installation is complete, you can copy the contents inside the Crack folder and replace it on your software’s installation folder. The software is simply cracked. But the NLM method is much, much better and is recommended for downloads. The tutorial on how to use it is written in the form of a video in the link above and in writing below.

———————–

How to Install AutoCAD 2022 and AutoCAD 2023 NLM Method:

1) First, make sure your antivirus is completely disabled.

2) Extract the downloaded files by WinRar software to give you the ISO file of the software. You can run this file directly on Windows 10 and 11. It is recommended to use software such as Daemon Tools, PowerISO, UltraISO, etc. Use for Mount Image.

3) Make sure you are connected to the internet before you run the setup. After at least 1% of the software has been installed, you can disconnect your internet.

4) Do not run the software after the installation is complete. Download the full package of activators. There are two methods in front of you, which are very easy with License Patcher. Please run the “Autodesk License Patcher Uninstaller.exe” file as Run as Administrator once to remove if any content is already installed on your system.

5) Run the “Autodesk License Patcher Ultimate.exe” file as Run as Administrator and wait for a while until the message that the installation was successful for you.

6) Run the software. Click on the “Use a network license” option. In the next window, select the Single License Server option and put the Server Name as “127.0.0.1” or “localhost”.

7) Run the software.

 

The first method – for single-user use:

USING XFORCE
KEYGEN

– Download Autodesk Active Video Tutorial 2019 video file using XFORCE KeyGen

1) First, make sure that your internet is completely disconnected. This means that your device must not be online. Then install the software.

2) Once the installation is complete, run the software. At the very beginning, it will ask you to activate. Click on the “Enter a serial number” option.

3) In the next window, click on the Activate option. Now enter the value of the serial number in one of the following statements (be careful not to copy the series written below! enter the series manually in the software and avoid copying):

666-69696969

667-98989898

400-45454545

066-666666666

4) To enter the Product Key value for the 2019 versions, please Keys.txt the AUTODESK 2019 Product text file, and for the 2020 versions, open the Product keys for Autodesk products 2020.txt text file and get the Product Key value of your product. Y

For example, the Product Key value for AutoCAD 2019 is equal to: 001K1

For example, the Product Key value for AutoCAD 2020 is equal to: 001L1

5) Click Next. On the Activation Options page, you will be given a phrase called Request Code. Select this value and copy it with the combined key Ctrl+C. Now, you need to run the keygen file. If your operating system is 64-bit, xf-adesk19_x64.exe file, and if it’s 32-bit, run the xf-adesk19_x86.exe file as Run as Administrator.

For the 2020 versions of Autodesk products, just run the Autodesk 2020 Keymaker.exe keygen file as Run as an Administrator.

6) Click on the Patch option to see the Successfully Patched message. Now, put the value you copied in step five into the Request box and click Generate. Copy the value generated in the Activation box in full (make sure to copy all and not copy incomplete).

7) Return to the software environment and its activation. Click on the option I have an activation code from Autodesk. Sixteen boxes will appear for you. Right-click on box number 1 and hit Paste to copy the value obtained from step six.

8) Click Next. The job is done, and your software is fully activated.

Tip 1: If you don’t see the Activation Options page in step five, it’s because you’re not offline. To fix the problem, start the activation process once again (close the activation page and the software completely and run it again) until this page appears for you.


====================

Method 2 – To use the server license (multi-user):

Using FlexNET

Download the video file of Autodesk Active Video Installation 2019 using FlexNET

1) Dear users, please note that at the moment, all Autodesk 2019 products are activated in the same way. There is no need for Product Code and such issues (like previous versions). Of course, you can see the Product Code of your product in the download file, in the crack folder in the Product.Keys.txt file.

2) First, make sure that your internet connection is completely disconnected. Then proceed to install the software.

3) Once the installation is complete, do not run the software at all.

4) Depending on your system architecture (32-bit or 64-bit), install one of two folders, Crack-nlm-2018-x64 or Crack-nlm-2018-x64. This will allow Network License Manager to be installed on your system.

5) After installing the fourth step, replace the crack files as follows:

5-a) Copy and replace the executable file of the adskflex.exe in the following place:

C:/Autodesk/Network License Manager

5-B) Copy and replace the adlmint.dll file in the following location:

C:/Program Files/Common Files/Autodesk Shared/CLM/V7/MSVC14

6) This step is very important. In this step, you need to edit the license file according to your system. The lic.dat file is located in the crack folder in the Autodesk Network License Manager 2018 Crack by X-Force folder. You can open this file with text editing software such as Notepad or Notepad++.

IN THE FIRST LINE ARE THE TWO TERMS HOSTNAME AND MAC. To record the appropriate values, run the LMTools Utility software (this software will be installed for you after you succeed in the fourth step).

In the software environment, enter the System Settings tab. See the two values of Computer/Hostname and Ethernet. These two values are placed in the lic.dat file as follows:

Replace the Computer/Hostname value with the HOSTNAME statement

Replace the Ethernet value with the term MAC.

It’s not done yet! Now refer to the License.txt text file in the crack folder. All the content in it should be added in a new line at the end of the lic.dat file.

Once you’ve done all three, lic.dat file is ready for your system. Save it to a permanent address that you will have easy access to, such as C:/lic.dat.

7) In the LMTools environment, go to the Config Services tab and fill in the values as follows:

– In the Service Name section, type Autodesk.

– In the Path to the lmgrd.exe file section, enter the following executable file:

C:/Autodesk/Autodesk Network License Manager/lmgrd.exe

– In the Path to the license file section, address the license file you edited. In this tutorial we have saved the license file in C:/lic.dat.

Tick the Use Services option, then Start Server at Power Up.

8) Refer to the Service/License File tab. Select the Configuration using Services option and select the Autodesk option from the corresponding list. Then make sure that you check the LMTools ignores license file path environment variables option (i.e. it is enabled).

9) Refer to the Start/Stop/Reread tab. Click on the Start Server and ReRead License File options, respectively, and make sure that both are done successfully.

10) Go to the Server Status tab and click on the Perform Status Enquiry option.

11) The job of setting up the server is finished. Now again, make sure that your internet is completely disconnected. Please note that the internet should be disconnected, not your network card or wireless card! Make no mistake!

12) In the initial implementation of the software, it asks you what license you have for activation. Click on the small option at the bottom of the window in the middle, “Help me choose.”

13) In the next window, select the Multi-user option. In the next window, make sure that your tab is on Single License Server. Then enter the server name value exactly 127.0.0.1.

14) Click Done. The job is done.


====================

Autodesk Products Installation Training 2018

Before you do anything, make sure to run the Keygen file as Run as an Administrator. The Keygen file is located in your download file in the KeyGen_XFORCE_2018 folder.
1) Select one of the following serial numbers as the installation serial (be careful not to copy the following written serials! Manually enter the serials into the software and avoid copying):

666-69696969
667-98989898
400-45454545
066-6666666

4) To enter the product key value, please open the AUTODESK.2019.Product.Keys.txt text file and get the product key value of your product.

For example, the Product Key value for AutoCAD 2018 is equal to: 001J1

3) Now finish the installation and restart the software. Now that you have run the software again, click on the Activate option, and you will be told that your serial is wrong. Select Close and select Activate again.
4) Now select the option “I have an activation code from Autodesk”.
5) At the moment you are in the software activation menu, go to the KeyGen_XFORCE_2018 folder and run one of the 32-bit or 64-bit versions of the keygen as Run As Administrator according to the version of your software.
6) Click on the “Patch” option to see the “Successfully Patched” message appear.
7) In the software activation window, you will be given a “Request Code”, copy it exactly in the keygen in the “Request” field and click on the Generate option.
8) Now copy the code received from Kajan in the software activation window and start running the software.

 

RELATED ARTICLES

2 COMMENTS

    • 1) Install Autodesk Application – Do Not Start it yet

      2) Install the Autodesk network license manager (v11.19.4) from crack folder (NLM.msi Update 8)
      -Default install is “C:\Autodesk\Network License Manager”
      -Stop any running instance (lmgrd, adskflex) if you have one
      -Replace adskflex.exe by cracked one

      3) Replace the netapi32.dll – \Program Files (x86)\Common Files\Autodesk Shared\AdskLicensing\Current\AdskLicensingAgent\

      4) Edit lic.dat and change HOSTNAME and MAC to suit your configuration (if you are not sure start LMTOOLS Utility and go to
      System Settings, your HOSTNAME and MAC will be listed)
      You can change vendor port too and add your previous licenses of course 🙂
      Save lic.dat where you want (we suggest to “C:\Autodesk\Network License Manager” folder)

      5) You have 2 options:
      1)Start Network License Manager manually :
      Run the license manager with “lmgrd.exe -z -c lic.dat” from “C:\Autodesk\Network License Manager” folder
      Or
      2)Create a Service: (suggested)
      Start LMTOOLS Utility (lmtools.exe GUI) from “C:\Autodesk\Network License Manager” folder
      – in ‘config services’, add a “Autodesk’ service name
      choose C:\Autodesk\Network License Manager\lmgrd.exe for path to lmgrd
      choose X:\path\where\you\saved\lic.dat for path to license file
      choose a empty file to have debug logs (optional)
      tick ‘start server at power up’ and ‘use services’
      Click Save
      – in ‘service/license file’ choose configuration using services and tick ‘ignore license file path env var” (dont click that if you
      you wanna use a ditributed licensing .. or you will have to edit or create a Licpath.lic file)
      – in ‘start/stop/read’ click ‘start server’
      click ‘rereadlicense file’
      – in ‘server status’ click ‘perform status enquiry’
      check that you have ‘adskflex: UP v11.18.0’
      check features are activated : Users of 87545ACD_2022_0F: (Total of 100 licenses issued; Total of 0 licenses in use) for example
      – in ‘server diags’ check all featured can be checked out
      – check logs also win ‘config services’ if you configured it

      7) Start Your Autodesk Application
      – When prompted select “Use a network license”
      – Select “Single license server”
      – Use 127.0.0.1, localhost or where the flexlm daemon is installed (syntax could be port@server).

      NOTE: in some cases after restart your computer still requires license path go in services.msc and make autodesk license server run automatic mode.
      NOTE: This is mixed Magnitude – xforce i made so welcome use it as you like.

      ########################################
      TOTAL domination again for your pleasure
      Smoke it!
      ########################################

      You Could also set a distributed license system, having one machine serving them all

      For that matter
      you need to Set the ADSKFLEX_LICENSE_FILE environment variable on the client machine (the procedure varies depending on the operating system).

      To set the environment variable

      Use the procedure described for your operating system to set the environment variable:

      For Windows 7/8/10:

      Right-click Computer and click Properties, or, in the Control Panel select System and Maintenance > System
      Click Advanced system settings and select the Advanced tab.
      Click Environment Variables.
      In the Environment Variables dialog box, under System Variables, click New.
      In the New System Variable dialog box, enter ADSKFLEX_LICENSE_FILE in the Variable Name field.
      In the Variable Value field, enter an at sign (@) followed by the host name of each license server to which you want to point the client. Separate each server name with a semicolon (;). For example:

      @server1;@server2;@server3

      Dont forget to open your firewall, you may also need to check the LICPATH.LIC file in root of the installed application in case you have issues

      If you still want to use 2018-19-20-21 applications, simply add their features with the corrected signature into our new lic.dat license file.

      Block hosts:
      127.0.0.1 genuine-software.autodesk.com
      127.0.0.1 genuine-software1.autodesk.com
      127.0.0.1 genuine-software2.autodesk.com

LEAVE A REPLY

Please enter your comment!
Please enter your name here

TUTORIALS